|
|
 |
Charge
Controller |
| AW-CY6/12 AW-CY12/24 |
| The controller automatically selects for 12V and 24V system |
Main functions |
12V system |
24V system |
High voltage charge disconnect(HVCD) |
14.4V |
28.8V |
Low voltage load disconnect (LVD) |
11.0V |
22V |
LVD reconnect |
12.5V |
25V |
Low voltage alarm |
11.4V |
22.8V |
Load over-current protection |
6A |
Temperature compensation |
-4mV/ °C /cell |
Operating temperature |
-40 °C ~85 °C |
Over temperature protection |
Both panel and load are disconnected, if temperature exceed the range of -40 °C ~60 °C |
Night-time operating function |
Function Choice by press the button |
|
| |
|
| |
| LED indicators: |
status |
Red LED |
Green LED |
Blue LED |
Battery is chargeable |
Both flash every 5 seconds |
|
High battery voltage |
Off |
Flash |
Low battery voltage |
Flash |
Off |
Load short-circuited |
On for 60 seconds |
off |
Over ambient temperature |
Flashing by turns |
Night control function |
Open |
Flash |
Off |
Off |
|
| |
| Electrical |
System voltage |
12V/24V |
Self consumption (LEDs off) |
3.2mA |
Short-circuit protection |
Open |
Polarity protection |
Battery |
Reference applied |
Battery voltage |
|
| |
| NOTE: |
| 1 |
Connect the battery terminal first, then the others. The controller will recognize the battery's voltage to set up the system voltage automatic. Make sure the battery voltage is normal when you choose for your system |
| 2 |
When night-time function is applied, there is a 30 seconds delay to shift the load status (on/off). During the delay, both red and green and blue led are on. And the timing is displayed at the beginning and the end of delay status |
| 3 |
The controller work in nighttime status automatic when start. And the preestablished timing is 4.5 Hours. Press the button more than 2Sec to change the control mode, while the blue led is on, it means the nighttime control mode is working; while the blue led is off, it means no nighttime control function. While in nighttime control mode, it cycled displaying the timing hours, the timing can be reset form 1.0 hour ~ 9.5 hours by press the button, incremental change is 0.5 hour per press-button. When finished the setting, it'll return to work after 20Sec delay time |
| 4 |
The control board is printed isolated lacquer for long life |
| 5 |
Pure copper connector made by Germany , high quality without any rust for long time working |
| 6 |
The input voltage must below 55V in any connect terminals, otherwise it may be destroyed |
|
| |
| MODEL: AW-CY6/12, AW-CY12/24 |
AW-CY6/12C AW-CY12/24C
AW- CY6/12CT AW- CY12/24CT |
6A,12A,18A |
AW- CY6/12CL AW- CY12/24CL
AW- CY6/12CLT AW- CY12/24CLT |
AW- CY6/12LT AW- CY12/24LT
AW- CY6/12LTT AW- CY12/24LTT |
AW- CY6/12LTM AW- CY12/24LTM
AW- CY6/12LTMT AW- CY12/24LTMT |
AW-CY6/12C-30A AW-CY12/24C-50A
AW-CY6/12CLT-30A AW-CY12/24 CLT-30A
AW-CY6/12CLTM-30A AW-CY12/24 CLTM-30A |
30A,50A |
|
| |
| Attention: |
'C'- charger 'L' - light control 'T' - timing function
'M' - morning load open function ' T ' - Boost function. |
|
|
| |
| Packing size |
6A\12A\18A: 13*11*4cm, 0.2kg, 50pcs/CTN , 54*20*27cm, 10kg.
30A\50A: 25*15*8cm, 0.6kg,20pcs/CTN , 54*30*28cm, 15kg. |
|
| |
|
