Features:

1.      Controlled by the Intelligent chip to realize the intelligent control of charging  and lighting.

2.      Intelligent lighting model with four types---strong,weak,quick-flashing and slow flashing ,being on and off by long-pressing, and mode switching by short-pressing.

3.      The interior accumulator featured by overcharging, over-discharging, short circuit and overload protection and controlled otput, is reliable in long terms.

4.      Output power is automatically controlled by high- efficient PWM to adjusting to the major chargers in the market.

5.      LED indicators acquaint the customers with the working codition of the charger.

6.      Abolishment of the common snap switch eliminate the life problem of the mechanical switch and prolong its working life even in a relatively damp enviroment.

7.      Charging and Lighting can be used simultaneously. Just put the plug to charge in any mode of lighting or press the button to light while charging, which is only in the strong mode to be on and off by pressing. 

1.      Intelligent lighting:

Press the button ① for 2s to start the lighting function with 4 modes, the white LED shine with strong light.Second short press will make the light weaker to save energy. Third short press turns the light to quick flashlight to send SOS or caution signals designed for emergency.Another short press turns the light to slow flashing to save energy. The status indicator is red when pressing succesfully ,and it is off when releasing the button. Pressing the button for more than 2s will make the indicator flashligh and the light off .

2.      Charging for the electronic appliance:

The charging function is designed for the portable electrnics,which can be used for any appliance with 1 Lion battery or 3-4 NiH batteries.Plug the male connector into the DC-OUT socket, and connect the female with the appliance,then the status indicator is red flashing ,which means the charger is outputing power and judging if it adjust to the model. If not ,it will automaticaly adjust till the chip lock on the certain output voltage by detecting the standing charging current,then the indicator will turn to steady green light. If it cannot detect the charging current within 80s, the indicator will turn to alternate flashing of gree and red light, which means the output voltage of the charger cannot adjust to the electronic appliance or the cable is not well connected.Please try again after checking the connector.If it dosen’t work, it means the outpur voltage cannot adjus to the appliance.

The charger will automatically turn off after 12minutes’ detection when the appliance is fully chargerd. And the indicator will turn red flashing to indicate the charging is finished.Pull out the connector and the indicator will turn off. 

3.      Charging for the interior accumulator:

The interior accumulator can be charged by the 1.1W solar panel or the AC-DC charger through the DC-IN socket(DC voltage＜6V,input current＜1A). Openning the charger and putting the panel facing the sunlight, the power indicator will turn yellow which means the solr panel works. The indicator will also be yellow when charging by AC-DC. Don’t put the panel under sunlight while charging by AC-DC.

The interior accumulator whose capacity is 1100mAh can be fully charged within one day(6-7hours) by solar panel under affluent sushine or 2hours by AC-DC charger. AC-DC charger is recommended before going-out if permitted. Keep the solar panel facing the upright sunlight as possible as you can to get more electricity.